Directions:
1.- Cover baseboard, carpet, etc., with protective plastic and/or tape.
2.- Wet surface. Sprinkle NovaMarmol powder on the floor (1 -2 oz. M2) over an area of about 2.5M2 at a time.
3.- The NovaMarmol water mixture should make a wet slurry. Buff the mixture with a hogs hair pad for 5 to 10 passes over each tile or section.
4.- Check the level of gloss with the squeegee. When the desired level of gloss is achieved, squeegee the NovaMarmol mixture to the adjacent area and repeat the process. Add NovaMarmol and water as needed.
5.- Remove the NovaMarmol mixture using a wet-dry vacuum. Flood rinse the polished area and buff again with the same pad without adding more NovaMarmol, and vacuum dry the area.
